TOHO METAL INDUSTRIES.CO.,LTD

 TD-311 R20R14

TD-311

process

Control Panel


 This machine is used for piling up blanks(R20 or R14) for dry battery metal jackets. Blanks which are cut by Tandem slitter(TD-211) are gathered and piled up in this Blank piler(capacity of piling up is 1,000-1,200 blanks). For the slitting process for R6 or R03 size strips,the slitter line is assembled of the Sheet feeder,the Tandem slitter and the Down stacker(TD-313). The Down atacker is the stacker of strips,which automatically move down when the number of strips on the Down stacker increases. The Blank piler is not needed for R6 or R03 size slitting process. When the Sheet feeder(TD-101) and the Tandem slitter(TD-211) are combined with the Blank piler(or the Down stacker),a series of operations are performed automatically.

Specifications
 Blank Piller TD-311
Capacity 5-8 strokes
Range of Accumulation (Width) 45 mm - 60 mm
Range of Accumulation (Length) 85 mm - 120 mm
Horse Power Required 1 KVA
Air Required 100 l/min
Pressure Required 0.5 Mpa
Measurement 1.36 M3
Net Weight 850 kg

BACK

省エネ大賞の受賞を記念して 省エネ大賞の受賞を記念して 省エネ大賞の受賞を記念して to TOP PAGE